2013 CTM 000-28 Adirondack Spruce /Madagascar Rosewood 28 Promotion Model

000-28 Custom Model with premium woods

Martin / 2013 CTM 000-28 Adirondack Spruce /Madagascar Rosewood 28 Promotion Model

Martin Custom Shop factory tour project,
This 28 Promotion Model was specially ordered by the dealer as part of the Martin Custom Shop factory tour project.

This is one of the premium Custom Shop models made by only a limited number of skilled craftsmen in Martin.
The wood used was also selected by the dealer, and you can feel the care that went into every part of it.

The body top is made of Adirondack spruce, which is also used for the Pre-War model.
The grain of the wood is packed tightly from the wide width to the center of the top of the body, giving it a punchy appearance.

Side back is Madagascar rosewood
Beautiful quarter-sawn and creamy in color.
It is very beautiful and elegant.

The pick guard is black.
It is also sprayed with beveled edges,
The body is not painted in, which alleviates some of the concern about Martin cracks.
In fact, after more than 10 years, there are still no cracks or crack repairs,
It is still in beautiful condition and has been well cared for by the previous owner.

The fingerboard has three snowflake inlays from the 4th to 9th frets, which is a style that appeared in the early 1900s, even before the 12th fret joint.
It is not flashy, but it has a calmness to it that gives it a more old-fashioned feel.

Bracing pattern is non-scalloped X.
Long saddle specification.
The logo mark on the head is silk-screened, which gives it a very atmospheric look.

The guitar is a wonderful guitar that makes you feel as if you are on a journey through the history of the 000-28, with elements from the birth of the 000-28 to the present day scattered throughout the guitar.

[specs/included case].
TOP: Solid Adirondack Spruce
BACK/SIDES: Solid Madagascar Rosewood
NECK: Select Hardwood
FINGERBOARD/BRIDGE: Ebony
BRACING：Rear Shifted (Scalloped) X-Bracing
ELECTRONICS：n/a
SCALE: 635mm
NUT-WIDTH: 43mm
CASE: Original Hard Shell Case
OTHERS: Warranty card of the time

[Playing Condition]
- Thorough inspection and adjustment of neck and wood by acoustic guitar specialist
- Neck is straight, no chatter or clogging.
- String height at 12th fret: 2.2mm on 6th string side, 1.8mm on 1st string side
- Saddle protrusion: approx. 3.0mm

[Covered by 5-year Premium Adjustment Warranty]
- Includes a warranty of adjustment support by a craftsman specializing in acoustic guitars with a track record of repair/adjustment of approximately 2,000 guitars per year.
- Customization consultation to suit your playing style is welcome.
[For a fee]
- Priority will be given to repairing peeling of adhesive parts such as bracing and bridge due to aging.
- We can also provide replacement work for fret board and other consumable parts.

-----------------------------------------------