Truetone 1 Spot Pro XP5-PS Pedalboard Power Supply
The XP5-PS is a package containing the 1 Spot Pro XP5, along with a 12Vdc 2.5A adapter which allows you to power the XP5 without having a CS11. The adapter comes with an array of international plugs, so you can take it with your pedalboard anywhere in the world. Some musicians may even choose to get one of these, plus another XP5, to distribute their power around the pedalboard and have the dual XP5’s acting as two pedal risers.
- 5 Isolated Outputs
- The Ultimate Compact Isolated Power Supply
- Links To Additional Truetone Expansion Boxes
- 9Vdc 500mA Per Output
- Includes DC Cables For Your Pedals
- Powered By CS11 Or The Included Adapter
- 1 SPOT PRO: The Original Studio-Grade Power For Your Pedals
The 1 SPOT Pro Story
“A lot of people over the years had told us that we should make a power brick. Even some of my own staff urged me to do it, but I didn’t want to for two reasons. First, I knew the 1 SPOT could power just about every pedal out there, so I didn’t see the need. Second, I didn’t want to make just another knock-off of someone else’s power brick. If we were going to make one, we were going to do it our way and have features that nobody else could offer. As pedal designs changed and it became more common for digital pedals to require isolation and for others to need something other than 9Vdc, I finally saw a reason for us to design a power brick.”
“It took 3 years and lots of experimentation, but we were finally able to design a 1 SPOT Pro, using our own proprietary technology to give musicians all the features they need for today’s pedalboards. The original 1 SPOT still works great for most musicians, but for those who need more power and versatility, the 1 SPOT Pro fills the need perfectly.”
- Bob Weil (Founder & President - Truetone)
FEATURES
1 SPOT Technology
1 SPOT Technology… what does that mean and why should I care? Technically, it’s switching power supply technology, which is very different than what anyone has ever put inside a power brick. Normally, you would find just a big transformer and a handful of small electronic components inside a power brick… old tech that hasn’t changed in decades and has a lot of limitations. Truetone took the same triple filtered switching power supply technology found in Truetone's famous 1 SPOT and scaled it up to make the 1 SPOT Pro models. With much more space to work with, Truetone was able to completely eliminate noise, provide total electrical isolation between outputs, create multiple voltages, and still give you the ability to use it anywhere in the world.
A major benefit of using a switching power supply is that it can handle far more current (power being pulled out of it) than any transformer-based power supply. Although Truetone had to put power rating labels on each output to satisfy certification agencies (yes, Truetone actually certified these, unlike many companies), the outputs can generally handle far more than the label shows. For example, you can connect a 300mA pedal to a 200mA output, without causing any problems. With a transformer-based power supply, you can’t get away with that. The important thing is to not exceed the total of all the labels. With a CS7 (for example), the output labels add up to 1900mA total. That means the total current draw of all your pedals should be less than 1900mA.
Energy Efficient
Prior to the 1 SPOT, musicians either used one linear power supply (a.k.a. wall wart) per pedal, or used batteries. Both solutions for powering pedals were very inefficient with energy, with batteries also contributing greatly to the toxic waste stream. In 2000, Truetone pioneered the use of switching power supply technology to alleviate this condition in an economically-, energy- and environmentally-conservative way. The 1 SPOT power supply was designed to replace many such external power supplies and/or batteries simultaneously. It provided plenty of power with a very low noise level to successfully meet the needs of musicians. By offering musicians a solution that was more cost effective and energy efficient, and moving the market away from linear transformer-based power supplies to switching power supplies, Truetone has caused the saving of thousands of watt-hours per musician per year. Utilizing a more comprehensive switching power supply solution, the 1 SPOT Pro sets a new level of efficiency for power bricks, while still meeting the needs of musicians for low noise operation, even in severe conditions where the pedals themselves may generate interfering noise.
Worldwide input voltage
Just like with the original 1 SPOT, (and your laptop power supply and phone charger), the 1 SPOT Pro uses switching power supply technology which allows you to use it anywhere in the world. The 1 SPOT Pro won’t leave you stranded at your first international gig!
Rugged Steel Housing
If you’re a touring musician, or even if you just play at the local pub regularly, you know how important it is to have road-worthy gear. No worries with the 1 SPOT Pro. The housing is all steel, with cleverly designed vents that should keep out the accidental beer spill, should that ever happen.
Pure Isolation
Since pioneering the first switching power supply for musicians, the original 1 SPOT, Truetone gained many years of experience in creating very low noise power for pedals. When Truetone started designing the 1 SPOT Pro, the first multiple output switching power supply, Truetone worried a lot about how to eliminate noise completely. Isolation is part of the solution to noise elimination, but not all of it. Each output is galvanically isolated from the other to help give you pure, clean, noise-free operation of your pedals. However, Truetone also provided an additional layer of pure analog regulation, taking advantage of the greater ability of analog circuits to provide the highest possible suppression of in-band audio noise. There is an artistry involved in these designs, and it’s come at the price of decades of hard work. But all of this put together is what Truetone call Pure Isolation.
SPECIFICATIONS
Cables
The 1 SPOT Pro XP5-PS includes an assortment of DC cables. The cables are of various lengths, color-coded for easy cable management and with right angle plugs on the pedal end.
Power cables (all are center pin negative polarity):
- (3) DC18 (5.5x2.1mm barrel plugs; 18” (457mm) – White
- (2) DC12 (5.5x2.1mm barrel plugs; 12” (305mm) – Yellow
International Adapter
The XP5-PS comes with a 12Vdc, 2.5A external power adapter. This adapter has 4 interchangeable plugs for use in most regions of the world. Instructions on how to change the plugs is included in the user manual.
Dimensions
- 88 x 88 x 30mm (3.46 x 3.46 x 1.18”); 336 grams (0.74 lbs.) - weight and dimensions of XP5 only, not including cables or packaging.
Input Voltage
- 12Vdc 2.5A. External power supply (included with XP5-PS) must have a 5.5x2.1mm barrel plug, center pin positive. The XP5 is also designed to be powered directly from the output on the back of a 1 SPOT Pro CS11.
Available Output Voltages
All outputs are 9Vdc, 500mA.
Can the 1 SPOT Pro power my pedal?
That question can best be answered by looking at the following questions and notes…
Which output and settings do I use for my pedals?
It is important for you to know the power requirements for your pedal. For every pedal that you are going to power via the 1 SPOT Pro XP5-PS, you need to know the following:
- What is the voltage required by the pedal?
- Does the pedal require AC or DC voltage?
- What is the polarity of the pedal? (Center pin positive or negative.)
These questions can usually be answered by:
- Inspecting the pedal itself near the power jack.
- Referring to the owner’s manual.
- Checking online, or contacting the manufacturer
- If your pedal can be powered by a 9Vdc battery, it can be powered by one of the 9Vdc outputs ( an exception being the Boss ACA pedals, see below).
Notes on using certain pedals with the 1 SPOT Pro XP5:
- The vast majority of pedals use 9Vdc. Check your pedals to make sure they require 9Vdc, as that is the voltage on all outputs of the XP5.
- Eventide Factor pedals and H9/H90 may be powered with the addition of the CL6 converter (sold separately) for proper DC jack tip size and polarity.
- Line 6 M9 will also require the CL6 converter plug (sold separately).
- Line 6 M5 may be powered without a converter plug.
- Line 6 HX series and POD Go require a C2.5 converter (sold separately). Please note, although these pedals can be powered by a single output, Truetone recommends using 2 outputs combined using a Truetone MC2 cable (sold separately) to split the current load.
- If additional analog 9Vdc pedals need to be powered, a Truetone Multi-Plug cable (sold separately) may be connected to any of the 9Vdc outputs depending on mA draw. If additional pedals need isolation, you may purchase another Truetone XP5 or XP8 expansion box which connects to the second input of the XP5. The XP5 has 5 isolated and filtered outputs, while the XP8 has 8.
- Pedals that do not have a power jack, yet are powered normally by a 9Vdc battery, may be connected using a CBAT converter (sold separately).
- Digitech Whammy: Version 5 or Whammy DT may be powered without a converter plug. Versions 1-4 cannot be powered by an XP5.
- Radial Tonebone 15Vdc pedals can only be powered by using a Truetone Voltage Doubler cable (model TVD – sold separately), and using a Reverse Polarity Converter (model CYR – sold separately).
We accept major credit and debit cards - Visa, MasterCard, Discover, and American Express. We also accept Paypal. Please contact us for Western Union. Orders must be approved by our authorization process. This includes validation of the shipping address with the issuing bank.
About Shipping and Delivery We utilize legitimate bonded and licensed shipping carriers only (UPS, Fed Ex, USPS etc). We are not the shipping company and therefore cannot be held responsible for faults that lay with the shipping company. By placing orders with us you agree to be present to receive packages sent to you. Bananas cannot be held responsible for lost packages once they are logged as delivered by the shipping company. Once a package is logged as delivered by the shipping company the customer is responsible for any issues related to the delivery of the package at that point. Packaging and Shipping Information Due to conditions beyond our control (weather, shipper's handling etc.) some boxes that products originally come in cannot be re-used to ship out to customers. In those rare cases we will remove and inspect all items and repackage them in acceptable boxing to make it safe to you. All items are still considered brand new, under full warranty and fall under our same guarantees. Note: Bananas recycles unused boxes when possible.
Online Returns: In order to return a product, Request a Return Authorization Number (RA Number). To request a Return Authorization Number (RA Number), please email info@bananas.com with your full name, order number, item that you are returning, and what type of return you would like us to process - either exchange for the same item, exchange for another item, or return for refund. In addition, if you can include the reason for your return, and any other comments, that would be appreciated. Once we process your RA request, we will send you a Return Authorization Number, and instructions on how to return the item. Return and Customer Satisfaction Policy: Any item (other than as noted below) purchased from Bananas at Large online store may be returned, within 45 days of the shipment date, for a full refund of the purchase price minus shipping costs, or for exchange or credit. Rather than make you click elsewhere for the 'small print', here it is in not-so-small print: The following items may not be returned: Consumable items such as (but not limited to) strings, picks, drum sticks, drum heads, phono cartridges and replacement speakers. Any item that is worn on the body or is blown into, such as (but not limited to) earplugs, wind controllers or harmonicas Computer software, items that can be copied and copyrighted material such as (but not limited to) books, videos and CD's Installed items such as (but not limited to) guitar pickups, drum heads, headphone parts and other installed parts If you agree to back order or special order a product, you agree that order may not be canceled unless approved by Bananas. Special orders already in transit either from manufacturer or Bananas cannot be canceled. Special order items may be returned if defective for exchange. You will be notified what items qualify as special order status. *In-store sales, please see posted Return Policies Other Things You Need to Know about Online Returns Shipping and/or handling charges are not refundable. It is your responsibility to pay return shipping and to fully insure the unit(s) you are returning. Also, it is your responsibility to cover shipping charges for sending the item to you. If you are quoted free shipping and return the item, you will be required to cover the actual shipping costs incurred by your order. Items that are returned must be in the original packaging, with all accessories and paperwork included in the original shipment, such as owner's manual(s) and warranty card. Items must be free from signs of use or wear, and both warranty card and manual(s) must not have any writing in them. If your order was shipped to you in outer packaging it must be returned in that packaging as well as the inner box or boxes. Returned items that do not arrive in the condition described above are subject to a $25 repackaging charge, plus the cost of replacing missing, soiled, worn or marked-on items. Obvious signs of use that reduce the value of a returned unit will be subject to additional charges based on how much we need to mark down the unit to make it sellable.