Truetone 1 Spot Pro CS11 Pedalboard Power Supply
The 1 Spot Pro CS11 is the same size as the CS12, but with all new outputs and options. It doesn’t replace the CS12, but gives users more power and more available 9Vdc outputs. It also has “one more” output on the back, which allows users to connect the CS11 to Truetone’s new expansion boxes like the XP5 and XP8. It goes to 11… and so much more.
- THIS ONE GOES TO 11!
- Quiet, powerful, dependable
- Includes brackets for mounting under Pedaltrain® pedalboards
- Extra output on the back for powering Truetone expansion boxes
- Cables and converter plugs included
- Worldwide input voltage
- 1 SPOT PRO: The original studio-grade power for your pedals
The 1 SPOT Pro Story
“A lot of people over the years had told us that we should make a power brick. Even some of my own staff urged me to do it, but I didn’t want to for two reasons. First, I knew the 1 SPOT could power just about every pedal out there, so I didn’t see the need. Second, I didn’t want to make just another knock-off of someone else’s power brick. If we were going to make one, we were going to do it our way and have features that nobody else could offer. As pedal designs changed and it became more common for digital pedals to require isolation and for others to need something other than 9Vdc, I finally saw a reason for us to design a power brick.”
“It took 3 years and lots of experimentation, but we were finally able to design a 1 SPOT Pro, using our own proprietary technology to give musicians all the features they need for today’s pedalboards. The original 1 SPOT still works great for most musicians, but for those who need more power and versatility, the 1 SPOT Pro fills the need perfectly.”
- Bob Weil (Founder & President - Truetone)
FEATURES
1 SPOT Technology
1 SPOT Technology… what does that mean and why should I care? Technically, it’s switching power supply technology, which is very different than what anyone has ever put inside a power brick. Normally, you would find just a big transformer and a handful of small electronic components inside a power brick… old tech that hasn’t changed in decades and has a lot of limitations. Truetone took the same triple filtered switching power supply technology found in Truetone's famous 1 SPOT and scaled it up to make the 1 SPOT Pro models. With much more space to work with, Truetone was able to completely eliminate noise, provide total electrical isolation between outputs, create multiple voltages, and still give you the ability to use it anywhere in the world.
A major benefit of using a switching power supply is that it can handle far more current (power being pulled out of it) than any transformer-based power supply. Although Truetone had to put power rating labels on each output to satisfy certification agencies (yes, Truetone actually certified these, unlike many companies), the outputs can generally handle far more than the label shows. For example, you can connect a 300mA pedal to a 200mA output, without causing any problems. With a transformer-based power supply, you can’t get away with that. The important thing is to not exceed the total of all the labels. With a CS7 (for example), the output labels add up to 1900mA total. That means the total current draw of all your pedals should be less than 1900mA.
Multiple Voltages (CS Series only)
Truetone recognizes that not all guitar pedals run off 9V. That’s why all 1 SPOT Pro models have outputs that can put out 9Vdc, 12Vdc or 18Vdc. The CS12 even has a variable voltage output for old-style fuzz pedals, and a 9Vac output for certain Line6 and Digitech pedals. And if you need to change the voltage of an output, Truetone also makes inexpensive converter cables to help you. There’s the Voltage Doubler, which does exactly what its name says, and the 18V to 9V Converter... which also does what its name says. They don’t have the most clever names, but they get the job done!
Worldwide input voltage
Just like with the original 1 SPOT, (and your laptop power supply and phone charger), the 1 SPOT Pro uses switching power supply technology which allows you to use it anywhere in the world. The 1 SPOT Pro won’t leave you stranded at your first international gig!
Rugged Steel Housing
If you’re a touring musician, or even if you just play at the local pub regularly, you know how important it is to have road-worthy gear. No worries with the 1 SPOT Pro. The housing is all steel, with cleverly designed vents that should keep out the accidental beer spill, should that ever happen.
Pure Isolation
Since pioneering the first switching power supply for musicians, the original 1 SPOT, Truetone gained many years of experience in creating very low noise power for pedals. When Truetone started designing the 1 SPOT Pro, the first multiple output switching power supply, Truetone worried a lot about how to eliminate noise completely. Isolation is part of the solution to noise elimination, but not all of it. Each output is galvanically isolated from the other to help give you pure, clean, noise-free operation of your pedals. However, Truetone also provided an additional layer of pure analog regulation, taking advantage of the greater ability of analog circuits to provide the highest possible suppression of in-band audio noise. There is an artistry involved in these designs, and it’s come at the price of decades of hard work. But all of this put together is what Truetone call Pure Isolation.
Energy Efficient
Prior to the 1 SPOT, musicians either used one linear power supply (a.k.a. wall wart) per pedal, or used batteries. Both solutions for powering pedals were very inefficient with energy, with batteries also contributing greatly to the toxic waste stream. In 2000, Truetone pioneered the use of switching power supply technology to alleviate this condition in an economically-, energy- and environmentally-conservative way. The 1 SPOT power supply was designed to replace many such external power supplies and/or batteries simultaneously. It provided plenty of power with a very low noise level to successfully meet the needs of musicians. By offering musicians a solution that was more cost effective and energy efficient, and moving the market away from linear transformer-based power supplies to switching power supplies, Truetone has caused the saving of thousands of watt-hours per musician per year. Utilizing a more comprehensive switching power supply solution, the 1 SPOT Pro sets a new level of efficiency for power bricks, while still meeting the needs of musicians for low noise operation, even in severe conditions where the pedals themselves may generate interfering noise.
SPECIFICATIONS
Cables
The 1 SPOT Pro CS11 includes a generous assortment of cables and converter plugs. The cables are of various lengths, color-coded for easy cable management and with right angle plugs on the pedal end.
Power cables (all are center pin negative polarity):
- (2) DC26 (5.5x2.1mm barrel plugs; 26” (660mm) – Purple
- (2) DC22 (5.5x2.1mm barrel plugs; 22” (559mm) – Blue
- (4) DC18 (5.5x2.1mm barrel plugs; 18” (457mm) – White
- (3) DC12 (5.5x2.1mm barrel plugs; 12” (305mm) – Yellow
- (1) MC2 Two 5.5x2.1mm barrel plugs with 5.5x2.1mm input socket.
Converter Plugs:
- (1) CL6 – (5.5x2.1mm barrel input, 5.5x2.5 barrel output; reverse polarity) Green – for Line 6 DL4/M9/etc. and some Eventide pedals.
- (1) CYR – (5.5x2.1mm barrel input, 5.5x2.1 barrel output; reverse polarity) Red – reverse polarity converter
- (1) C35 – (5.5x2.1mm barrel input, 3.5mm male output; tip positive) Black – 3.5mm (1/8”) plug converter
- (1) CBAT – (5.5x2.1mm barrel input, Black battery clip output) Connects to battery clip wires inside pedals that do not have DC jacks. Do NOT connect to a battery!
- (1) C2.5 – Gray – 5.5x2.5mm plug converter - can be used for Line 6 HX series and POD Go
Dimensions
- 205 x 86 x 50mm (8.07 x 3.38 x 1.97”); 971 grams (2.14 lbs.) - weight and dimensions of power supply only, not including cables or packaging.
Input Voltage
- The 1 SPOT Pro CS11 can be used anywhere in the world without the use of a step-up or step-down transformer. Like Truetone's 1 SPOT, it transforms wall voltage from 100-240Vac, and converts it into the stated voltages on the bottom of the unit.
Available Output Voltages
- Outputs 1-2, 10-11: 9VDC (500mA)
- Outputs 3-4: 9VDC or 18VDC (100mA)
- Outputs 5-6: 9VDC or 12VDC (250mA)
- Outputs 7-9: 9VDC (250mA)
Can the 1 SPOT Pro power my pedal?
That question can best be answered by looking at the following questions and notes…
Which output and settings do I use for my pedals?
It is important for you to know the power requirements for your pedal. For every pedal that you are going to power via the 1 SPOT Pro CS11, you need to know the following:
- What is the voltage required by the pedal?
- Does the pedal require AC or DC voltage?
- What is the polarity of the pedal? (Center pin positive or negative.)
These questions can usually be answered by:
- Inspecting the pedal itself near the power jack.
- Referring to the owner’s manual.
- Checking online, or contacting the manufacturer
- If your pedal can be powered by a 9Vdc battery, it can be powered by one of the 9Vdc outputs ( an exception being the Boss ACA pedals, see below).
Notes on using certain pedals with the 1 SPOT Pro CS11:
- Older Boss pedals marked “ACA” use outputs 5 or 6, set to 12Vdc. Newer Boss units marked “PSA” can be used with any 9Vdc output.
- For pedals with a current draw higher than 400mA, please utilize outputs 1,2,10 or 11. To be sure about the current draw of your pedals, please use a Truetone mA Meter, sold separately.
- Eventide Factor pedals and H9/H90 may be powered by any output with a rating of 250mA or higher, with the addition of the CL6 converter for proper DC jack tip size and polarity.
- Line 6 M9 may be powered by outputs 1,2,10 or 11, but will also require the CL6 converter.
- Line 6 M5 may be powered by outputs 1,2,10 or 11, without a converter plug.
- Line 6 HX series and POD Go require a C2.5 converter. Please note, although they can be powered by outputs 1,2,10 or 11, it is recommended to power them from 2 of those outputs combined using a Truetone MC2 cable (included) to split the current load.
- If additional analog 9Vdc pedals need to be powered, a Truetone Multi-Plug cable (sold separately) may be connected to any of the 9Vdc outputs depending on mA draw. If additional pedals need isolation, you may purchase a Truetone XP5 or XP8 expansion box which connects to the 12Vdc jack on the back panel. The XP5 has 5 isolated and filtered outputs, while the XP8 has 8.
- Pedals that do not have a power jack, yet are powered normally by a 9Vdc battery, may utilize any 9Vdc output, along with the CBAT converter.
- Digitech Whammy: Version 5 or Whammy DT may be powered by outputs 1,2,10 or 11. Versions 1-4 cannot be powered by a CS11, unless you purchase the optional Truetone ACY-US cable (North America only) and use the original Digitech Whammy power supply.
- Radial Tonebone 15Vdc pedals can be powered by outputs 3 or 4, switched to 18Vdc, using the Reverse Polarity Converter (CYR) included with the 1 SPOT Pro.
We accept major credit and debit cards - Visa, MasterCard, Discover, and American Express. We also accept Paypal. Please contact us for Western Union. Orders must be approved by our authorization process. This includes validation of the shipping address with the issuing bank.
About Shipping and Delivery We utilize legitimate bonded and licensed shipping carriers only (UPS, Fed Ex, USPS etc). We are not the shipping company and therefore cannot be held responsible for faults that lay with the shipping company. By placing orders with us you agree to be present to receive packages sent to you. Bananas cannot be held responsible for lost packages once they are logged as delivered by the shipping company. Once a package is logged as delivered by the shipping company the customer is responsible for any issues related to the delivery of the package at that point. Packaging and Shipping Information Due to conditions beyond our control (weather, shipper's handling etc.) some boxes that products originally come in cannot be re-used to ship out to customers. In those rare cases we will remove and inspect all items and repackage them in acceptable boxing to make it safe to you. All items are still considered brand new, under full warranty and fall under our same guarantees. Note: Bananas recycles unused boxes when possible.
Online Returns: In order to return a product, Request a Return Authorization Number (RA Number). To request a Return Authorization Number (RA Number), please email info@bananas.com with your full name, order number, item that you are returning, and what type of return you would like us to process - either exchange for the same item, exchange for another item, or return for refund. In addition, if you can include the reason for your return, and any other comments, that would be appreciated. Once we process your RA request, we will send you a Return Authorization Number, and instructions on how to return the item. Return and Customer Satisfaction Policy: Any item (other than as noted below) purchased from Bananas at Large online store may be returned, within 45 days of the shipment date, for a full refund of the purchase price minus shipping costs, or for exchange or credit. Rather than make you click elsewhere for the 'small print', here it is in not-so-small print: The following items may not be returned: Consumable items such as (but not limited to) strings, picks, drum sticks, drum heads, phono cartridges and replacement speakers. Any item that is worn on the body or is blown into, such as (but not limited to) earplugs, wind controllers or harmonicas Computer software, items that can be copied and copyrighted material such as (but not limited to) books, videos and CD's Installed items such as (but not limited to) guitar pickups, drum heads, headphone parts and other installed parts If you agree to back order or special order a product, you agree that order may not be canceled unless approved by Bananas. Special orders already in transit either from manufacturer or Bananas cannot be canceled. Special order items may be returned if defective for exchange. You will be notified what items qualify as special order status. *In-store sales, please see posted Return Policies Other Things You Need to Know about Online Returns Shipping and/or handling charges are not refundable. It is your responsibility to pay return shipping and to fully insure the unit(s) you are returning. Also, it is your responsibility to cover shipping charges for sending the item to you. If you are quoted free shipping and return the item, you will be required to cover the actual shipping costs incurred by your order. Items that are returned must be in the original packaging, with all accessories and paperwork included in the original shipment, such as owner's manual(s) and warranty card. Items must be free from signs of use or wear, and both warranty card and manual(s) must not have any writing in them. If your order was shipped to you in outer packaging it must be returned in that packaging as well as the inner box or boxes. Returned items that do not arrive in the condition described above are subject to a $25 repackaging charge, plus the cost of replacing missing, soiled, worn or marked-on items. Obvious signs of use that reduce the value of a returned unit will be subject to additional charges based on how much we need to mark down the unit to make it sellable.